高输出功率小瞬时电流实验仪（耐脉冲实验仪）-（来服务器操控）

High voltage low current tester (arc resistance tester) - (computer control)

类产商品编码称：耐电弧试验机

Product name: electric arc resistance tester

产品设备参数：NDH-A

Product model: NDH - A

够满足标准的：GB/T 1411-2002《固体颗粒电绝缘相关材料耐高低平瞬时电流焊弧蓄电池放电的试验台》（同等IEC  61621-1997）及ASTM D495等规定的规范设计制作制作的，并包含IEC 149、UL 746A等试验装置的办法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

关键用于领域及功能键：

本可靠性试验箱是如果根据软件应在高压电机、电子产品和家廷用水量子产品等相关行业的技工用塑胶、环氧光敏树脂胶和耐压漆等耐压涂料的耐脉冲特性评比，主在物质耐压涂料如：塑胶、塑料膜、环氧光敏树脂、云母片、瓷器、夹丝玻璃、耐压油、耐压漆、厚纸板等材质的耐脉冲特性测试方法；

本可靠性测试仪由微机抑制运作，应该界面显示某一科学试验状况及科学试验的时间，科学试验开始后并维持某一科学试验数据库，并可网页打印.规则实验操作情况汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为上下左右一体机结构设计，下边为使用系统化，顶部为实验设计箱。

2 本食品完成*新智慧控制技术工艺，完成抉择程序流程（IEC或ASTM）可定时使用冲击试验，并在PC上展示实验期间和最后。

3 **机械性能正常，抗影响力量强，各种测试计算精性高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断时段出现偏差的原因：低于 ±10ms

2 调压器出水量：2kVA

3 额定负载测试电流值：12.5kV

4 试验台直流电压高精度：±3%

5 电压电流保持高精度：±10%  电流量精确测量误差：1.5%

6 电极片对试板气压：（0.5±0.05）N

7 电级建材：钨棒

8 电级相应：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用情况温度因素：（23±2）℃

10 用情况内部含水率：（50±5）%

11 开关电源：220V±5%  50Hz  10A

12 做实验的时候    方式：   国家标准/美标/10 mA 间隔/20 mA 不断/30 mA连续不断/40 mA连着

13 应力测试编译程序正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 车辆尺寸：

NDH-A    耐电孤现场实验仪-微机有效控制

NDH-B    耐电孤做实验的时候仪-触摸显示屏屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！